Redmi Note 8 Pro is the newest budget-friendly powerhouse from Xiaomi’s sub-brand. Aside from its super hard outer shell for a robust durability, it’s also featuring an all new quad-camera setup with a 64MP large primary sensor, a MediaTek Helio G90T chipset and a large 4,500mAh battery with fast charge.
Instructions: put code in your cart after clicking “Proceed to checkout” This coupon is not available for limited offer products This coupon is not used for on sale goods If the shop lets you to use multiple coupon codes at checkout, use the codes in the right order to get the most savings. (updateTime 2020-01-15 21:07:05)
JETBeam Jet KO-02 Flashlight Review. It utilizes CREE XHP35 LED, output ranges from 12 to 1800 lumens, up to 270 meters.
This pocket-sized flashlight only measures 5″ long, using one CREE XHP35 LED, high-efficiency digital circuit combined with specially designed deep reflector, but it can crank out 1800 lumens and a beam up to 270 meters. Made from aerospace-grade aluminum and is IPX-8 waterproof(2 meters underwater ) and impact resistant. Offers three brightness modes and recharges via USB. User-friendly metal side switch for five brightness levels and strobe easy to operate.
Xiaomi mi 9 comes with 6GB of RAM and 64GB of storage as standard, and you’ll also be able to pick up a model with 128GB or 256GB of storage and 8GB of RAM.
Xiaomi mi 9 comes with 6GB of RAM and 64GB of storage as standard, and you’ll also be able to pick up a model with 128GB or 256GB of storage and 8GB of RAM. There’s a version that offers 12GB of RAM, but that’s exclusive to the Chinese market. Like previous Mi flagships, the Mi 9 misses out on a MicroSD slot, but you do get a dual SIM card tray.
Nitecore TIP 2 is a powerful pocket flashlight by Cree XP-G3 S3 LED, it emits a max 720 Lumens output and creates a 100 yards long-range throwing distance.
Coupon: BGBF19 Banggood Regular Price : $65.59 Your Save : $29.63 Coupon Limit: 100 times Expires : February 29, 2020 Instructions: put code in your cart after clicking “Proceed to checkout” This coupon is not available for limited offer products This coupon is not used for on sale goods If the shop lets you to use multiple coupon codes at checkout, use the codes in the right order to get the most savings. (updateTime 2020-02-13 16:13:50)
Lumintop FW3A Flashlight is a powerful EDC product! Best coupon deals for this product is $36.55 (in Bangood). Check coupons below.
The FW3A was designed by Fritz15 and the flashlight forums TLF & BLF. Brought to life by Lumintop. A small 18650 triple LED lamp with tail switch and a great, a compact, ergonomic, feature-packed EDC-style light.
Official Specs and Features
CREE XP-L HI 3D(NW 5000K) CREE XP-L HI 1A(CW 6500K)
Nitecore TUP Review & Lockout. This is an insane keychain light at 1000 lumens! The digital display shows you the exact battery time remaining as well as the lumen readouts.
Greflector, it emits a max 1000 Lumens output and creates a 197 yards long-range throwing distance by running on 1200mAh Li-ion Battery. The Flashlight is indispensable in your searching, rescuing, camping, fishing or hunting activities, and so on.
Jetbeam RRT-01 flashlight is built of high-quality aluminum alloy, and it has a very solid construction. Excellent waterproof, suitable for outdoor environment, adverse weather conditions except for diving.
Price without coupon: $45.95 Coupon ($31.99): AFT03 Long term effective
Review ( 5000K version)
The package of Astrolux FT03 is relatively simple. Only the hand strap and the o-ring.
Astrolux FT03 comes with a smooth reflector, Luminus SST40-w, and Aluminum alloy bezel. If stainless steel bezel, it will be better, I love stainless steel.
The cell tube has diamond-shaped knurling. It can be slip-resistant and feels good.
There is no oxide layer on the thread of head, which is estimated to increase heat conduction. I think you don’t want to DIY, you can stick the barrel head directly with heat conduction glue, cooling will be better.
The tail uses end face conduction. Unscrew the tail cover to power off, not bad.
Both the head and the tail have massive double wound springs. The internal resistance is very low.
The overall shape is as described above, which is suitable and moderate in size.
Unscrew the tail-cap and insert a 26650 cell.
2.Double check the polarity every time before closing: The battery must point with plus (nipple) towards the head.
Screw the tail-cap back. The FT03 will flash twice when electrical contact is made. Continue to tighten the tail-cap to a gentle stop. Do not over- tighten.
All functions are performed using the single side button. Note that pressing this button continuously for more than 16 s enters the UI configuration settings (indicated by the light blinking). If this is done inadvertently, exit the configuration settings by simply releasing the button briefly then pressing it again continuously for about 4 s until all the resulting blinks stop.
The FT03 comes factory-set to use the RAMPING UI: From OFF, press&hold the side button. The light output will ramp up from a very low level to full power. Release the button when the required light level is reached. (The full ramp takes about 3 s. To signal ‘End of Ramp’ it does a subtle blink ) Use a single-click at any time to turn the FT03 OFF.
The grip of the 26650 is good. I don’t like 4 lithium batteries, it’s too thick and it takes too long to hold.
From left to right are Nitecore p30, Astrolux FT03, Olight m2x-ut and ACEBEAM t30.From the spot, it can be seen visually that the luminous flux of FT03 and T30 are very close, and the color temperature is slightly lower, In theory, the light penetration is better.
The p30 is actually good, but 1000 lumens is a bit low. Astrolux FT03‘s reflector is big enough, it is powerful. T30 with xhp35hi, the reflector is also larger, actually more powerful than FT03, but it is not overwhelming.
Here is the disassembly section, two performance tests.
Charging test, the current is up to 1.8a and the minimum is 1.4a. It is convenient to use the type-c interface.
Illuminance curve, no wind, about 14 degrees at room temperature, Extremely bright for 6 minutes, the product is not very hot.
The double o-ring structure is quite good, it can prevent the bezel from loosening, and the seal is not bad.
The lens is coated on both sides. The color of the coating is blue-violet and it is beautiful. The lens has a certain thickness, and the general impact is difficult to break the lens.
Aluminum alloy reflector
Thermoelectric separation MCPCB
The circuit uses pure copper bezel
The circuit uses a direct drive circuit with good efficiency.No strobe.
The measured power is about 24w, and the battery is 26650.